Where to Buy PL2303HX USB to TTL to UART RS232 COM Cable module Converter

Product Description

Functional lines: black and red-VCC-GND, green-the TXD, white-RXDDoes not provide technical support: We only soldBrush technology is not in lineSo can not provide technical support services, thank you Package:1x PL-2303HX USB to RS-232 / TTL Cable

Product Details

Features

• PL-2303HX USB to Serial Controller adopted
• Approximately 1m long cable

Customer Reviews

Most helpful customer reviews

9 of 9 people found the following review helpful.
It works great, when you've got the correct drivers for your OS
By Drew Fairaizl
Make sure you track down drivers for your OS first before you purchase this one. The device itself worked flawlessly for low level firmware flashing. The latest driver for the PL2303HX can be found here http://prolificusa.com/pl-2303hx-drivers/

The URL above also has support documentation as none is provided with the product. The PL2303HX USB to TTL converter connected fine at a full 115,200 kbps speed and got the job done. For the price and a little downloading, it can't be beat.

Supported OS and driver info is below:

(For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions)
Installer version & Build date: 1.8.0 (2013-2-26)
Windows XP (32 & 64-bit) WDM WHQL Driver: v2.1.44.226 (2/5/2013)
- Windows XP Certified WHQL Driver
- Compatible with Windows 2000SP4 & Server2003
Windows Vista/7/8 (32 & 64-bit) WDF WHQL Driver: v3.4.48.272 (2/5/2013)
– Windows Vista, 7, 8 Certified WHQL Driver
– Compatible with Windows Server2008/Server2008R2/Server2012
– Driver also available via Windows Update (Vista, 7, 8). Refer to User Manual.

10 of 11 people found the following review helpful.
Works great, a wiring diagram would have been nice :)
By MDD
This device installed automatically in Windows 7 Professional and came right up and worked. A wiring diagram would have been nice as I had to come back to Amazon to confirm what wires did what:

"four colored-wire : black?GND/ red?VCC /white?RXD /green?TXD"

Using it with a custom PIC18 board and it connected right up to the TTL header and starting dumping data to a Windows terminal program as designed.

Great tool for the money.

7 of 7 people found the following review helpful.
5V VCC, 3.3V Tx/R
By L. Moretti
Recognized by Linux with no issues.

The adapter outputs 5VCC but 3.3V TX/RX. I thought at first this was causing me issues, but it turns out that I forgot to cross the Tx/Rx on the cable with the Tx/Rx on my board (Tx from the adapter goes to Rx on the board, Rx on the adapter goes to Tx on the board). Once I fixed this, the adapter works perfectly to access the serial connection in my ZyXel NSA320 NAS box.

See all 41 customer reviews...