Product Description
Monitor Specifications:
Screen Size:7 inch
Dimensions: 193*132*22(L*W*D) mm
Display Component: Color TFT-LCD
Number of Dots: 480W * RGB * 234H
Contrast Ratio: 100:1
Response Time: B→W 30ms W→B 10ms
Video Frequency: PAL/NTSC
Power Consumption: Around 8W
Video: Two way video input
Inset super powerful reception
English menu and blue background display
All-function remote controller
Multi-system choice for the customer, such as PAL, NTSC
Automatically turning system
Available for VCD/DVD/GPS/CAMERA
Car Rear View Camera Specifications:
Image Sensor: CMOS/CCD
Effective pixels: PAL: 628*586 pixels / NTSC: 510*496 pixels
Scanning System: 2:1 interface
Sync System: Internal
Horizontal resolutions: 420 TV lines
Sensor area: PAL:5.961mm*4.276mm
Minimum illumination: 0.2Lux/F1.8 (0 Lux with LED)
Video output: RCA connector, 1.0vP-P, 75ohm
S/N Ratio: More than 48db
Waterproof: IP67-IP68
Power consumption: 60mA
Power supply: DC12V±10%
Operating temperature: -20℃- 60℃ RH95%MAX
Storage temperature: -30℃- 60℃ RH95%MAX
Dimention:65*45*25mm
package:
7" TFT LCD Monitor
Power cables
Automotive Bracket for easy installation and stand alone
Remote Control
English Operation Manual
Car rear view camera *1
Power cable (1.2M) *1
Video cable (5M) *1
Double-sided adhesive *1
Note:
The video camera has a mirror image.
This Camera only support NTSC video system , so please make sure your monitor supports NTSC video system before you buy it .
Product Details
- Amazon Sales Rank: #1627 in Car Audio or Theater
- Color: Black
- Brand: Bellehome
- Dimensions: 4.29" h x 7.65" w x 9.59" l, 2.05 pounds
Features
- 7 inch TFT LCD Digital Car Rear View Monitor With Remote and Stand
- Waterproof Car Rear View Camera Night Vision
- Two RCA video can connect to GPS, DVD, PS2, Xbox or rear view camera etc with RCA video port for displaying purpose.
- the camera is Waterproof and can be installed on your license plate
- Easy installation without damaging to any parts of the car.
Most helpful customer reviews
96 of 96 people found the following review helpful.
Important things I learned During Installation - Instructions and video cable
By Michael Surprenant
The monitor is clear with great color, The camera appears to be waterproof as advertized. Lots of rain in the last 2 weeks. Picture quality still great. I learned a lot while installing this back up camera that I want to pass along since it comes with NO instructions. First. Do not use the included 20 foot video cable provided with the unit. I used it and found that It is not capable of carrying the video the distance needed without loosing most of the signal resulting in a very poor to non-existant picture. Second. I originally wired the monitor to the cigarette lighter so that it would turn on only while the key was on. Bad idea. The first drive with it was just after the sun went down and the monitor was so bright in my face that I could not see to drive. My solution to the issues was to wire the power to both the camera and to the monitor from the back-up light in the back of my quad cab full size pick-up truck. This means running the power from the back-up light to the monitor. This turned on the camera and the monitor only when I was in reverse. I replaced the flimsy tiny 20 foot video cable with coax cable (this is the cable used in your house to connect the tv to the cable company outlet. There are 2 sizes so you will need to buy the appropriate male RCA connectors, 1 for each end. You can buy the connectors at Home Depot and the tool to compress the conectors to the cable there as well. Probably avail also at Radio Shack but will cost more there.) While I was running the new videao coax cable from the back to the front of the truck, I also ran a 14 guage black and red wire for power at the same time. As I ran these I used zip ties to attach them to the existing factory installed cableing for the rear lights. At this point I was ready to go. I put the truck in reverse but the monitor did not turn on at all. Turns out (after several hours of scratching my head) that the ground was too weak. I found under the hood that the negative batery cable had two wires from it. One went to the engine block and the other went to the truck body. The one bolted to the truck body was easy to work with. I soldered a large lug to the end a fairly heavy 14 guage black wire that was large enought to accept the ground wire bolt attaching the ground to the truck body. I ran the other end into the cab and attached it the junction of the black wire from the back-up light and the black wire from the monitor. Once this connection was made the monitor turned on with a beautiful picture. Took me 2 weekends to figure it all out and to re-run all the wires from the back to the front
33 of 34 people found the following review helpful.
Wonderful monitor and camera at a reasonable price.
By JLMTR6
Monitor and camera work well together. The monitor has a very good display, color and sharpness. I mounted the camera above the rear window under the third brake light and cargo lights assembly on my pickup truck to watch the cargo in the truck and the trailer and load while driving for peace of mind. I plan to mount a second camera to the license plate frame since the monitor will accept another input. Having to switch inputs on the monitor is when the included remote will really come in handy! My only reservation is that I had to adjust the color setting very high to reduce the camera sensitivity for this application. It has worked flawlessly for the 6 months since purchase. It is a great product (especially the monitor) at a very low cost. As usual with Amazon, shipping was quick and the packaging good, it arrived complete and not damaged.
13 of 13 people found the following review helpful.
DIGITAL CAR REAR VIEW MONITOR & CAMERA
By BENNIE
SYSTEM WAS EASY TO INSTALL EVEN WHEN THE INSTRUCTIONS WERE VAGUE AT BEST. IT DOES THE JOB IT IS DESIGNED FOR. THE DELIVERY TIME WAS EXCELLENT. I AM VERY PLEASED WITH THE OPERATION OF THE SYSTEM.
Tidak ada komentar:
Posting Komentar